Accessories and Tools
Candock offers a large selection of basic accessories such as: cleats, bumpers, ladders, benches and diving boards.
The purchase of a dock, platform or any other type of floating system is important. It has to respond to your needs. This is why Candock offers you one of the most complete range of floating dock accessories in the industry. We offer you a large selection of basic accessories such as: cleats, bumpers, ladders, benches, diving boards, etc. We can make accessories or equipment that is perfectly adapted to your specific needs.
2
Yes
None
1
1000000
Name...
/accessories-and-tools/
Accessories and Tools
Accessories and Tools
GANGWAY RAMP
Candock has an exhaustive range of aluminum gangways and other accessories available. 1000 Islands Docks offers our clients Candock’s custom fabrication service to make accessories or equipment that is perfectly adapted to your specific needs for your docking project. 1000 Islands Docks maintains stock for our clients in,4’ widths and 4’, 8’, and 12 foot lengths of aluminum access ramps. 1000 Islands Docks uses the Thru Flow maintenance free decking in all our access and departure ramps. Candock’s custom fabrication service can manufacture access ramps in 5’, 6’ widths and any in length for your docking project.
Images
CONCRETE DEAD WEIGHT
#ST 009
Candock can provide pellet type dead weight casted with a central opening to attach a chain. These weights are easy to handle and can be combined to increase the strength of the overall anchor.
Sizes available:
-292 pds/132 kgs
-439 pds/200 kgs
-700 pds/318 kgs
Sizes available:
-292 pds/132 kgs
-439 pds/200 kgs
-700 pds/318 kgs
Images
RGB
#AL 003
The new preprogramed processors allows you to choose from 10 different programs already integrated to literally give life to your CANDOCK dock . Flashing lights , which dim from one color to another or “random” mode, these are all different ways to animate your cubes ! This converter has the same advantages as the one for white LED lights and uses the same wiring. In addition , it offers you the possibility to be used on different voltage electrical outlets (110 volts or 220/240 volts) , simply select the proper mode inside the box and voila ! As if that was not enough , we can also deliverer converters with cutom programs to synchronize your light system according to various parameters.
Images
RGB
#Al 002
The “LED” color lights are offering you the chance to customize your dock like no other product on the market. Accompanied by the new preset processors (AL 003), you can choose among 10 different programs already integrated to literally give life to your CANDOCK dock. Flashing lights, which dim from one color to another or “random” mode, these are all different ways to animate our cubes! These lights have the same advantages as the white LED lights (waterproof, long life span and easy to use)are working with the same wiring.
Images
TIDE MANAGEMENT SYSTEM
#TTC 0608900 1M / TTC 0608900 2M
Elastic mooring rope that will adapt to any water level fluctuations ( Tidal, natural or artificial ). Another advantage of this type of mooring product translates in a much more stable structure regardless of the water and weather conditions. Can also be combined to increase strength ( side by side ) or range of water level fluctuation the system can withstand ( end to end ). Available in 2 meters and 1 meter lengths.
Images
CAP FOR PVC COVERING
#MB 82.447-030
Cap used to cover the PVC posts. Required when using piling pvc covers. We also recommend to glue and secure it with screws.
Images
FLAG POLE
1000 Islands Docks and Candock have designed this custom flag pole application. The Canadian made flag poles come in silver and brown, in 15’, 20, 25 lengths. Please contact us for a quotation on your Candock Docking System.
Images
Mooring Whip Supports
Bracket to fix Dock Edge or similar type of mooring whips to the Candock docks.
*Also available in beige
Images
Heavy Duty Bollard
PILING DRIVER 2″ 7/8
EXTRACTION LEVER FOR 2″ 7/8
ASSEMBLY KEY FOR NUT (RATCHET SOCKET)
#B0060
To be used with a “ratchet type” wrench. We recommend using this key if you have a large quantity of nuts to install. It is also required for the installation of Candock’s ladder.
Images
ASSEMBLY KEY FOR G2 PIN (DRILL)
#B0097
Key for G2 connecting pins when you use a drill to reduce assembly time. Use it only with a ½¨ drill opening, at low speed with a two handed drill.WARNING: using a drill at high speed and/or with only one handle can cause injuries. When removing a connecting pin, always loosen the pin slightly with a manual key.
Images
Spacer
#A0066
Candock’s cubes are equipped with 4 ears, positionned at various heights. Due to the space created between them, the spacer will be used to fill this empty space. Spacers are mainly used for the Jetslide’s assembly. (boxes of 225)
Images
Sliding Nut
#A0062
Sliding nut that goes over one of the ears of our cubes and connects to the connecting pin to form a structure. (boxes of 105)
Images
EXT LUG CONNECTOR JETSLIDE
#LK 703015 JETSLIDE
This lug is used to fix the back tabs of cubes or corner cubes at the end of a jetslide.
Images
CLEAT REINFORCED
G2 POST CUBE
#ST 012
The post cube has a cylindrical opening to fit a 2 7/8¨ diameter galvanized steel pipe needed to anchor your installation. This post is also covered with a 3¨ interior diameter PVC cover and a cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7? (2,25 m).
* Also available in gray # ST 013.
* Also available in gray # ST 013.
Images
G2 STORAGE CUBE
#ST 020 / ST 019
Waterproof hatch cube offering you a storage space for various items.
Available in beige and gray: #ST 020 / ST 019.
Images
ENGINE SUPPORT
#RL 33
Small outboard engine aluminum bracket. Can be fixed to a platform of Candock’s cubes to allow installation of a small outboard motor (10 hp max.) allowing your platform to be motor-driven.
Images
JETSLIDE AIR ASSIST
#ST 025
The JETSLIDE system also features the best floating assistance system on the market – The AIR ASSIST. Used for heavier watercraft, this system keeps the JETSLIDE’s dimensions to a size suitable for marina spaces or cramped locations. The system is compact, lightweight, durable and easily installed. It is also quick and easy to operate.
Images
DIVING BOARD
#RL 8 / RL 9
This is a 6? (2 m) standard diving board that has been adapted for our products. It is fixed to a post cube. It should be installed on the 3rd row of cubes towards the interior of the dock.
*Available in Gray or Beige RL 8 / RL 9
Images
G2 LADDER
#RT 008B
Ladder entirely made of plastic. It can be folded on itself for security purposes and also to avoid seaweed build-up. This is the only ladder on the market with an upward inclined slope. It can also be installed on a conventional dock. Also available in gray # RT 008G
Images
G2 BENCH
#RL 2
Aluminum bench with a plastic seat and back rest in a colour assorted to the dock. This product is compatible with both product lines.
*Also available in gray
Images
DOCK LEG SUPPORT
#RL 95
Support that permits the insertion of a 1 11/16” pile used to anchor a dock or jetslide by sliding the pile through the tabs of the cubes. (see picture).
Images
G2 LOW PROFILE POST CUBE
#ST 015
This post cube is used with the low profile cubes. The low profile post cube has a cylindrical opening to fit a of 2 7/8¨ diameter galvanized steel pipe that will be used to anchor your installation. This post is also covered with a ? PVC sleeve and cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7? (2,25 m) and waves higher than 1.5ft. Also available in gray
Images
CLEAT
#LK 703025
Cleat used to anchor your boat to the dock. We recommend using a cleat for each 10? (3 m) length. For example: a 25? (8 m) long boat = use 3 cleats. Our docks move all the time, as does your boat, thus avoiding any unnecessary tension on the cleats. However, when you expect severe weather conditions, we recommend to tie it directly to the ears or pass it through the exterior lug connector. Our cleats are made of highly resistant plastic but less resistant than metal ones can be. (boxes of 40)
Images
G2 ANCHORING PLATE FOR CHAIN
DOCK BOX
#ST 027
Plastic dock box 20” x 30” x 11” or 51cm x 76cm x 28cm. The box is equiped with a Stainless lockable latch and can be fixed directly to the dock. It is ideal for storage of marine items. Available in white only.
Images
G2 CONNECTING PIN FOR ANCHORAGE
#ST 017
This connecting pin is made to anchor your dock without visible chains, those being attached directly under the dock . However, due to limited access, we do not recommend the use of this kind of anchorage if water level variations are superior to 2? (0,75 m) unless Tide Management System is used.
Available in beige and gray
Available in beige and gray
Images
EXTERIOR ANCHORING
#RL 10
This stainless steel anchorage ring allows you to attach a chain from the dead weight to the dock. To be installed through an exterior lug connector. The ideal product for salted water plus it gives you the possibility to easily adjust the tension of the chains.
Images
CHAIN ADUSTER
#RL 11
The chain adjuster is an economical type of anchorage for small installations. It gives you the opportunity to adjust your anchorage easily, so it can adapt to water level variations during the season.
Images
#LK 703011
Molded in one single unit, this product is made of a unique polyethylene resin making it soft and non-marking while allowing it to be extremely durable.
Images
FOLD DOWN CLEAT
#ST 032
Metal fold down cleat for an installation further on the dock.
Also available in gray: SS 316
Images
G2 REVOLVING AND FOLDING BENCH
#ST 021
A padded, pivoting and folding plastic seat. Can be removed quickly. Is provided with beige or gray custom made mounting pin.
Images
Accessories and Tools
GANGWAY RAMP
Candock has an exhaustive range of aluminum gangways and other accessories available. 1000 Islands Docks offers our clients Candock’s custom fabrication service to make accessories or equipment that is perfectly adapted to your specific needs for your docking project. 1000 Islands Docks maintains stock for our clients in,4’ widths and 4’, 8’, and 12 foot lengths of aluminum access ramps. 1000 Islands Docks uses the Thru Flow maintenance free decking in all our access and departure ramps. Candock’s custom fabrication service can manufacture access ramps in 5’, 6’ widths and any in length for your docking project.
CONCRETE DEAD WEIGHT
#ST 009
Candock can provide pellet type dead weight casted with a central opening to attach a chain. These weights are easy to handle and can be combined to increase the strength of the overall anchor.
Sizes available:
-292 pds/132 kgs
-439 pds/200 kgs
-700 pds/318 kgs
RGB
#AL 003
The new preprogramed processors allows you to choose from 10 different programs already integrated to literally give life to your CANDOCK dock . Flashing lights , which dim from one color to another or “random” mode, these are all different ways to animate your cubes ! This converter has the same advantages as the one for white LED lights and uses the same wiring. In addition , it offers you the possibility to be used on different voltage electrical outlets (110 volts or 220/240 volts) , simply select the proper mode inside the box and voila ! As if that was not enough , we can also deliverer converters with cutom programs to synchronize your light system according to various parameters.
RGB
#Al 002
The “LED” color lights are offering you the chance to customize your dock like no other product on the market. Accompanied by the new preset processors (AL 003), you can choose among 10 different programs already integrated to literally give life to your CANDOCK dock. Flashing lights, which dim from one color to another or “random” mode, these are all different ways to animate our cubes! These lights have the same advantages as the white LED lights (waterproof, long life span and easy to use)are working with the same wiring.
TIDE MANAGEMENT SYSTEM
#TTC 0608900 1M / TTC 0608900 2M
Elastic mooring rope that will adapt to any water level fluctuations ( Tidal, natural or artificial ). Another advantage of this type of mooring product translates in a much more stable structure regardless of the water and weather conditions. Can also be combined to increase strength ( side by side ) or range of water level fluctuation the system can withstand ( end to end ). Available in 2 meters and 1 meter lengths.
CAP FOR PVC COVERING
#MB 82.447-030
Cap used to cover the PVC posts. Required when using piling pvc covers. We also recommend to glue and secure it with screws.
FLAG POLE
1000 Islands Docks and Candock have designed this custom flag pole application. The Canadian made flag poles come in silver and brown, in 15’, 20, 25 lengths. Please contact us for a quotation on your Candock Docking System.
Mooring Whip Supports
Bracket to fix Dock Edge or similar type of mooring whips to the Candock docks.
*Also available in beige
Heavy Duty Bollard
Heavy duty bollard type cleat made of stainless steel. For use with bigger size boats.
PILING DRIVER 2″ 7/8
#B0138
Tool preventing piling damages while inserting them with a sledgehammer.
EXTRACTION LEVER FOR 2″ 7/8
#B0143
Custom designed tool facilitating post extraction. To be used with a regular jack.
ASSEMBLY KEY FOR NUT (RATCHET SOCKET)
#B0060
To be used with a “ratchet type” wrench. We recommend using this key if you have a large quantity of nuts to install. It is also required for the installation of Candock’s ladder.
ASSEMBLY KEY FOR G2 PIN (DRILL)
#B0097
Key for G2 connecting pins when you use a drill to reduce assembly time. Use it only with a ½¨ drill opening, at low speed with a two handed drill.WARNING: using a drill at high speed and/or with only one handle can cause injuries. When removing a connecting pin, always loosen the pin slightly with a manual key.
Spacer
#A0066
Candock’s cubes are equipped with 4 ears, positionned at various heights. Due to the space created between them, the spacer will be used to fill this empty space. Spacers are mainly used for the Jetslide’s assembly. (boxes of 225)
Sliding Nut
#A0062
Sliding nut that goes over one of the ears of our cubes and connects to the connecting pin to form a structure. (boxes of 105)
EXT LUG CONNECTOR JETSLIDE
#LK 703015 JETSLIDE
This lug is used to fix the back tabs of cubes or corner cubes at the end of a jetslide.
CLEAT REINFORCED
#ST 014
Similar to the regular cleat, but reinforced for more sever conditions.
G2 POST CUBE
#ST 012
The post cube has a cylindrical opening to fit a 2 7/8¨ diameter galvanized steel pipe needed to anchor your installation. This post is also covered with a 3¨ interior diameter PVC cover and a cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7? (2,25 m).
* Also available in gray # ST 013.
G2 STORAGE CUBE
#ST 020 / ST 019
Waterproof hatch cube offering you a storage space for various items.
Available in beige and gray: #ST 020 / ST 019.
ENGINE SUPPORT
#RL 33
Small outboard engine aluminum bracket. Can be fixed to a platform of Candock’s cubes to allow installation of a small outboard motor (10 hp max.) allowing your platform to be motor-driven.
JETSLIDE AIR ASSIST
#ST 025
The JETSLIDE system also features the best floating assistance system on the market – The AIR ASSIST. Used for heavier watercraft, this system keeps the JETSLIDE’s dimensions to a size suitable for marina spaces or cramped locations. The system is compact, lightweight, durable and easily installed. It is also quick and easy to operate.
DIVING BOARD
#RL 8 / RL 9
This is a 6? (2 m) standard diving board that has been adapted for our products. It is fixed to a post cube. It should be installed on the 3rd row of cubes towards the interior of the dock.
*Available in Gray or Beige RL 8 / RL 9
G2 LADDER
#RT 008B
Ladder entirely made of plastic. It can be folded on itself for security purposes and also to avoid seaweed build-up. This is the only ladder on the market with an upward inclined slope. It can also be installed on a conventional dock. Also available in gray # RT 008G
G2 BENCH
#RL 2
Aluminum bench with a plastic seat and back rest in a colour assorted to the dock. This product is compatible with both product lines.
*Also available in gray
DOCK LEG SUPPORT
#RL 95
Support that permits the insertion of a 1 11/16” pile used to anchor a dock or jetslide by sliding the pile through the tabs of the cubes. (see picture).
G2 LOW PROFILE POST CUBE
#ST 015
This post cube is used with the low profile cubes. The low profile post cube has a cylindrical opening to fit a of 2 7/8¨ diameter galvanized steel pipe that will be used to anchor your installation. This post is also covered with a ? PVC sleeve and cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7? (2,25 m) and waves higher than 1.5ft. Also available in gray
CLEAT
#LK 703025
Cleat used to anchor your boat to the dock. We recommend using a cleat for each 10? (3 m) length. For example: a 25? (8 m) long boat = use 3 cleats. Our docks move all the time, as does your boat, thus avoiding any unnecessary tension on the cleats. However, when you expect severe weather conditions, we recommend to tie it directly to the ears or pass it through the exterior lug connector. Our cleats are made of highly resistant plastic but less resistant than metal ones can be. (boxes of 40)
G2 ANCHORING PLATE FOR CHAIN
#RL 342
Anchoring plate for chain allowing easy chain length adjustments without any tools.
DOCK BOX
#ST 027
Plastic dock box 20” x 30” x 11” or 51cm x 76cm x 28cm. The box is equiped with a Stainless lockable latch and can be fixed directly to the dock. It is ideal for storage of marine items. Available in white only.
G2 CONNECTING PIN FOR ANCHORAGE
#ST 017
This connecting pin is made to anchor your dock without visible chains, those being attached directly under the dock . However, due to limited access, we do not recommend the use of this kind of anchorage if water level variations are superior to 2? (0,75 m) unless Tide Management System is used.
Available in beige and gray
EXTERIOR ANCHORING
#RL 10
This stainless steel anchorage ring allows you to attach a chain from the dead weight to the dock. To be installed through an exterior lug connector. The ideal product for salted water plus it gives you the possibility to easily adjust the tension of the chains.
CHAIN ADUSTER
#RL 11
The chain adjuster is an economical type of anchorage for small installations. It gives you the opportunity to adjust your anchorage easily, so it can adapt to water level variations during the season.
FOLD DOWN CLEAT
#ST 032
Metal fold down cleat for an installation further on the dock.
Also available in gray: SS 316
G2 REVOLVING AND FOLDING BENCH
#ST 021
A padded, pivoting and folding plastic seat. Can be removed quickly. Is provided with beige or gray custom made mounting pin.